Forum Post: RE: Actual GPMC XIP Timing on EVM is different from TRM.
Biser-san,Thank you so much for your support.I need to report to my customer whether the request has been approved.Could you give me the feedback and schedule to correct TRM from TRM team?Best regards, RY
View ArticleForum Post: RE: musb_init_controller failed with status -22
Hi,Please read this thread: http://e2e.ti.com/support/arm/sitara_arm/f/791/p/268305/937909.aspxBest regards,Miroslav
View ArticleForum Post: RE: PVRShell: Unable to create surface
Hi PrabindhThanks for ur reply.Basically am using Imagination RC2_1.9 user mode ddk with TI Graphics_SDK_4_08_00_01, and am succeeded in running 2D unittests after debugging. But failing in case of 3D....
View ArticleForum Post: RE: AM335x U-Boot: no nand device found. Custom board.
I am glad u were able to get it working!!! : )I did notice things were a little bit slower, due to the increase in page sizes but i did not change any of the defaults settings. For the most part...
View ArticleForum Post: Disappeered post about DM3730 and MMC2
Today I sent question about using DM3730 with MMC2 port and eMMC.Now I can see that my post id disappeared ??????What is problem ?Can you answer to my question?
View ArticleForum Post: AM3352BZCE30-GPMC Support
Hi folks,I am AM3352BZCE30 for one of the projects.I want to provide 4GB (Giga Bytes) of storage on my board, is it feasible to connect 4GByte of external flash with AM3352BZCE30, using NAND flash is...
View ArticleForum Post: RE: Ethernet freezes after a while - AM3352 Custom Board
Hardware issue: MDIO DATA pin with wrong pull-up resistor. Changed to regular value and ethernet is running 100% now.
View ArticleForum Post: RE: MDIO not able to poll PHY
You have the correct MDIO address for the PHY?
View ArticleForum Post: RE: Disappeered post about DM3730 and MMC2
Your post has been moved to the DM37X forum: http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/537.aspx
View ArticleForum Post: RE: AM3352BZCE30-GPMC Support
On your first question the answer is yes, you can use either NAND or eMMC. We cannot help on the second question - it's not related to the processor.
View ArticleForum Post: RE: SPI Flash
Hi Miroslav, I am tired to mount but it is not mounted ---One thing i noted that while booting it shows as follows:/etc/init.d/rc: line 176: /usr/bin/psplash-write: cannot execute binary file...
View ArticleForum Post: RE: AM335x EMMC Interface with MMC2
Dear Team,We resolved the issue. Thanks for the co-operation.RegardsJithin
View ArticleForum Post: RE: AM335x Linux problem with Toshiba TC58NVG1S3 NAND
Hi Stefan, This forum supports only the TI distributed Linux EZSDK, which currently is based on kernel v3.2
View ArticleForum Post: RE: Unable to connect ssh to beaglebone black
Hi Felix, Have you searched the forum. There are some threads on this topic, like: http://e2e.ti.com/support/arm/sitara_arm/f/791/t/206157.aspx
View ArticleForum Post: AM3358 NAND Capacity
What is the largest NAND single device that is supported by the AM3358?Can the GPMC support more than one NAND flash?What is the total NAND Density supported by the AM3358
View ArticleForum Post: RE: START_HERE.sh not found
I bought a BeagleBone Development Board from TI eStare (Order Number is 258705) on 7/31/2013. From Sitara Linux Software Developer’s Guide I found the following: When Beaglebone boots, a START_HERE...
View ArticleForum Post: Beaglebone Weather Cape Debian C/C++ Programming
On a Beaglebone with Angstrom I have a weather cape that works fine with for sensor in /sys/devices/platform/omap/omap_i2c.3/i2c-3/*/*_input ; do echo -n "$(basename $sensor): " ; cat $sensor ; done...
View ArticleForum Post: RE: problem with booting on am335x
This thread is identical to this one. The discussion will continue there. Closing.
View ArticleForum Post: RE: Details about AM335x External DMA Interrupt Pin
Absolutely, that's it! I knew I had seen it somewhere. Why was I looking for the iterrupt controller regusters in the MPU chapter, I can't guess. Thanks for highlighting this! I'll surely remember...
View ArticleForum Post: RE: AM3358 NAND Capacity
Charles, It's true that the GPMC has a max. 512MB address space. However NAND memories are not memory mapped. They are controlled by a command/address/data interface that's transmitted over the data...
View Article