Forum Post: RE: Crash/Issues with OMAPFlash app on AM3505
More details regarding the crash during ASIC ID reading stage,In order for it to work the production have to hold down the reset button before running the OMAPFlash programming command (using the...
View ArticleForum Post: USB OTG instability issue on AM1808
Hi, There is a strange issue observed on AM1808 custom board running Linux. The USB0 which is OTG port, unexpectedly switches from the host mode to device mode and stops responding to the device which...
View ArticleForum Post: [ 232.069030] PVR_K: (FAIL) SGXInit: Mismatch in client-side and...
Hello FriendsAm trying to use imagination user mode Graphics ddk 1.9.RC2@2139099 with AM335x TI Graphics ddk Graphics_SDK_setuplinux_4_08_00_02 on my BeagleBone. But after loading pvrsrvkm.ko...
View ArticleForum Post: RE: SGX on AM335x (Beaglebone) fails to start.
Hi Chris Can you brief me some of the modification you did ?Here am using imagination user mode Graphics ddk 1.9.RC2@2139099 with AM335x TI Graphics ddk Graphics_SDK_setuplinux_4_08_00_02 on my...
View ArticleForum Post: SI results for Am335x starter kit
SI results for Am335x starter kit board TMDSSK3358.
View ArticleForum Post: RE: AM335x SPI boot is very slow
Gerry,Thanks for your explanations.The 200ns for register access match pretty good with my measured 186ns. This makes me feel as if I'm not doing the wrong thing.Regards,Patrick
View ArticleForum Post: RE: Difference between "psp config" and "sdk config"
Thank you for this very fast answer. I was looking for answer because I didn't understood the meaning of both columns in the web page :http://processors.wiki.ti.com/index.php/AMSDK_Linux_User's_Guide,...
View ArticleForum Post: RE: GPMC bus randomly does not work
Hi Alberto, I am afraid that I can't help with structuring your program. Maybe you should move the 256 reads cycle and j++ in an ISR that is fired by the GPIO interrupt.
View ArticleForum Post: RE: AM335x GPMC in AAD-mode
They should be A17 on AD0, A18 on AD1 and so on...
View ArticleForum Post: RE: AM335x NAND flash ECC discreptancy between u-boot and kernel.
Hi Miroslav,Thank you for the hints.Out requirements are:Linux should be able to change u-boot env partition.u-boot should be able to read env written by Linux.As I see from the link above, u-boot env...
View ArticleForum Post: AM335x EMAC ALE's Filtering
Hello,Could you teach me about AM335x EMAC ALE's Filtering.I am looking at SPRUH73I "14.3.2.7.2.1 Ingress Filtering Process" and "14.3.2.7.2.2 VLAN_Aware Lookup Process".If I received a multicast...
View ArticleForum Post: AM335x EMAC ALE's Filtering
Hello,Could you teach me about AM335x EMAC ALE's Filtering.I am looking at SPRUH73I "14.3.2.7.2.1 Ingress Filtering Process" and "14.3.2.7.2.2 VLAN_Aware Lookup Process".If I received a multicast...
View ArticleForum Post: RE: BT not working on WL1835MOD on Beaglebone
Hi Ankur, You will probably get a faster response if you ask your question on this forum: http://e2e.ti.com/support/low_power_rf/f/307.aspx
View ArticleForum Post: RE: dcan1 on BBB only transmits data when loopback mode is...
Hi Daniel, BBB and the Angstrom distribution are supported by the community at www.beagleboard.org.
View ArticleForum Post: RE: AM335x eMMC CMD24 timeouts
[quote user="Biser Gatchev-XID"]We don't support WinCE on this forum. There is a deicated forum for it: http://e2e.ti.com/support/embedded/wince/default.aspx[/quote]But, how does software affect in...
View ArticleForum Post: RE: MDIO not able to poll PHY
Sounds very strange to me. Can you probe the MDIO to check clock frequency and whether the PHY is actually outputting all F's? I can see no reason why detection should function in u-boot and not in...
View ArticleForum Post: RE: spi flash boot
Hi Eric,The hex dumps from the MLO files seem fine. I can't explain why the md5sums are different.Please try these exact commands to flash the SPI flash with the images. The offset of the u-boot.img is...
View ArticleForum Post: No privileged mode in main()
Board: BBB, A6 with processor XAM3359AZCZ100AM335X_StarterWare_02_00_01_01CCSv5.5, Windows7XDS100v2linker command file: AM3359.cmdHello everybody,when creating a new empty project and loading the...
View Article