Forum Post: CCS/66AK2G12: About DDR3 access way
Part Number: 66AK2G12 Tool/software: Code Composer Studio Dear Rahul, Currently, we are developing products using 66AK2G12. Debug DSP and ARM via Jtag using CCS, but there are some issues. Please let...
View ArticleForum Post: RE: EVMK2H: EVMK2H boot up doesnt complete
Hi Rex, Yes, i was able to roll back to 5.2 release, looking forward to the resolution of this issue in the upcoming release. Best Regards Sheraz Javaid
View ArticleForum Post: EVMK2H: Cross Compiling Kernel Driver
Part Number: EVMK2H Hi, I need to write a kernel module for PCI and then cross compile it using ti-evmk2h-processor-sdk-5.02.00.10. How do i have to set up the make file, i tried one with the following...
View ArticleForum Post: RE: TDA2HG: OpenCVCanny link can't run 4 channel input.
Hi, OpenCVCanny link does not support multi channel. That is why you are facing this issue when you run for multiple cameras. Regards, Anuj
View ArticleForum Post: RE: Compiler/AM5728: Bitbake build error
thanks very much Kemal. I will test this archive and give the feedback soon. Another essential question I have is that which method you recommend for developing our application with AM5728: 1 -...
View ArticleForum Post: RE: CCS/AM5728: Application error
Hi Sahin, Can you please share one .cfg file that can be use as reference for USB on M4 core. As there must be some configuration issue, that am missing due to which not able to run my application on...
View ArticleForum Post: RE: AM3358: eMMC programming
Hi Ron, Thanks for the info. Will try to implement and revert to you with feedback. br Anwej
View ArticleForum Post: RE: Compiler/DRA745: dra745 config ddr as 32 bit
Hi @ ya lin, can you check if this Application Note can help you: You can look also at this thread: Regards, Yordan
View ArticleForum Post: RE: Compiler/AM5728: Bitbake build error
[quote user="user4252301"]2- using CCS in windows for developing an application.[/quote] Using CCS in Windows is something which goes for RTOS. For Processor SDK Linux and Processor SDK Linux RT you...
View ArticleForum Post: RE: CCS/66AK2G12: About DDR3 access way
Hi, [quote]we can write to DDR3, but the value is not correct value. we asked to below URL. Are there related? e2e.ti.com/.../848220 [/quote] If you've initialized your DDR correctly the bus width...
View ArticleForum Post: AMIC110: Operation performance points
Part Number: AMIC110 Hi there, on the eval board (TMDXICE110-BTA) is the power for VDDS derived from da dedicated LDO (1V8_2). According to the datasheet (SPRS971C chapter 6) it is also possible using...
View ArticleForum Post: RE: AM4376: GPIO inputs in U-boot
Krunal, GPIO1 and GPIO2 are being set using external resisters solders to the board. There is not a processor driving the level. CPU A is tied as shown below: CPU B is tied as shown here and in the...
View ArticleForum Post: RE: AMIC110: Operation performance points
Hi, Information about the OPP's can be found in section 5.4 of the AMIC110 Datasheet Rev. C: http://www.ti.com/lit/ds/symlink/amic110.pdf In this document you will also find packaging information.
View ArticleForum Post: RE: EVMK2H: Cross Compiling Kernel Driver
Hi, When adding your custom driver into the kernel, you need to modify the Kconfig + Makefile in the appropriate driver directory, in order to add the driver into the kernel build. Next if you wish to...
View ArticleForum Post: RE: EVMK2H: Cross Compiling Kernel Driver
Hi Yordon, Thanks for replying, can you refer me to some tutorial that you might think will be closest to mine. Best Regards Sheraz Javaid
View ArticleForum Post: RE: Compiler/PROCESSOR-SDK-DRA7X: CPU Statistics is showing Black...
Hi, But if you are running linux then the master core should be A15. And all the usecase should be launched from A15. If you are launching this from IPU then it will be a lot of changes which needs to...
View ArticleForum Post: RE: AM5728: VOUT2 timings
Hi Tom-san, Thank you for your reply. I will suggest to our customer a case of using a zero delay buffer, but it is very difficult to control the clock delay by PCB trace and load capacitance. Could...
View ArticleForum Post: TDA2EG-17: TDA2EG-17 How to IPu HDMI Output
Part Number: TDA2EG-17 HI master: sdk: processor_sdk_vision_03_05_00_00 my board boot as linux target, The customer needs the same HDMI to be divided into two HDMI channels through ts3dv642, namely...
View ArticleForum Post: RE: PROCESSOR-SDK-AM65X: SD card boot issue on EVM
Tarun, I test on my side, I have TMDX654GPEVM base board, rev E3. I created one 32GByte SD card with below script: ti-processor-sdk-linux-am65xx-evm-06.00.00.07/bin/create-sdcard.sh I select default...
View ArticleForum Post: AM5728: PCIe re-enumeration fails
Part Number: AM5728 Hi, This question is regarding our own board and Linux based on the ti SDK 05.00.00.15 We are using the PCIe bus as two separate links to two different FPGA devices where the AM5728...
View Article