Tarun, I test on my side, I have TMDX654GPEVM base board, rev E3. I created one 32GByte SD card with below script: ti-processor-sdk-linux-am65xx-evm-06.00.00.07/bin/create-sdcard.sh I select default (pre-built) images. Then plug this SD card into EVM J17 SD CARD holder, make boot switches for SD boot (SW3.2 = ON, SW3.3 = ON, SW2.3 = ON, all rest OFF), plug USB cable to UART J42 connector, plug 12V power supply and power on the board. I have below boot log: (Please visit the site to view this file) When I stop the boot process in u-boot prompt, I can print the boot environments, I have below values: (Please visit the site to view this file) Please check what u-boot environments you have on your side. Regards, Pavel
↧