Forum Post: RE: AM3352 RMII ethernet: no data sent or received
Ben,What frequency is your master oscillator running at?
View ArticleForum Post: RE: AM335x Multiple Audio Channels on MCASP0 Linux
Nevermind, figured it out. The problem was i had only set 2 TDM Slots in my board file in the kernel (arch/arm/mach-omap2/board-am335xevm.c). This was the culprit:diff -r 9790044f6d7e...
View ArticleForum Post: RE: arecord command for mono channel recording for left and right...
BB Black is supported on http://beagleboard.org/Community/Forums. Please ask your question there.
View ArticleForum Post: RE: AM335x_ICE Ethercat SyncManager watchdog
Hi Frank,Thanks, I will contact our third party for help.Does the Watchdog of SM can be disable(ControlByte="#x24") with PRU of REV 1.0A of AM335x_ICE in your test.
View ArticleForum Post: RE: AM335x Starter Kit Capacitive Touch Screen
Ram, thanks again for your quick response. I have tried to recompile the tslib with the changes for the event type reporting. I say "tried" because I am not sure if it worked because the results are...
View ArticleForum Post: RE: AM3354 LCD controller resolution
Hi Nomoto-san, The datasheet is correct. Also if you look in sections 13.5.1.11 and 13.5.1.12 of the TRM you will see that values up to 2048 can be programmed for pixels-per-line and lines-per-panel.
View ArticleForum Post: RE: AM3352 watchdog reset
According to Table 8-25 in the AM335X TRM Rev. J, the watchdog reset does not reset the test and emulation logic.
View ArticleForum Post: RE: ADC on SITARA
The latest SDK can be downloaded from here: http://software-dl.ti.com/sitara_linux/esd/AM35xSDK/latest/index_FDS.htmlHere is the Sitara Linux Software Developer's guide and here are the SDK Installer...
View ArticleForum Post: RE: MaxTouch mxt224e i2c touchscreen on AM335x-evm
Hi Kadir and Igor, I'm trying to make mxt224 work without success, have you succeeded?, how?.This is what i do in board-am335xevm.c:# include <linux/i2c/atmel_mxt_ts.h> static u8 mxt_init_vals[]...
View ArticleForum Post: RE: ti-sdk-am335x-evm-06.00.00.00 cross compile libtool version...
Thank you and don't worry Miroslav, I'll use Ubuntu 10.04 for everything but cross compiling with Ubuntu 12.04.Best regards
View ArticleForum Post: Ethernet problem on Starter Kit
Hello~I encounter an ethernet problem in uboot.SDK 06_00_00_00 : Second ethernet port does not work SDK 05_05_00_00 : Two ethernet port work normallyAre there any patch available to enable Second...
View ArticleClik here to view.
Forum Post: RE: Cannot boot from Starterware for AM335x Starter Kit
The MLO is from this folder. Is it right?
View ArticleForum Post: RE: TMDSICE3359 some general Questions
The way the board was designed it is not possible to use " standard" ethernet and EtherCAT at the same time.
View ArticleForum Post: RE: USB flash drives with AM335x
DK,Your thought of checking the clock tree got us to review clock related items - thanks. I want to post what we finally did to fix these USB issues so that someone else may benefit. I fixed the...
View ArticleForum Post: RE: AM335x Multiple Audio Channels on MCASP0 Linux
Alright i seemed to have arrived at a solution. I tried out several things and this wiki:http://processors.wiki.ti.com/index.php/McBSP_Channel_Swappingmade me think that the dma was having issues. So...
View ArticleForum Post: RE: AM335x and RMII TLK105, link not stable
Hi Biser,Another thing I noticed, and I do not know if this is a symptom or distraction, is that the following message is printed during boot:[ 0.808711] davinci_mdio davinci_mdio.0: phy[0]: device...
View ArticleForum Post: RE: AM335x with RMII Ethernet Phy
Good catch Prad.Further review of the TLK110 documentation reveals that although it does provide a 50MHz clock output, it cannot be used to actually clock the RMII interface, so in the case of TLK110...
View ArticleForum Post: RE: AM3703 USB Testmode
Thanks Bin!I really appreciate your help. I have the 2.6.39 kernel with debugfs turned on. I can see the debugfs entries as mentioned in the processors.wiki.ti.com article. However, I'm a little...
View ArticleForum Post: RE: Profinet IRT
Thanks Frank,I only need a rate a little slower than 400usec, so I'll keep trying to see what I can do with the current stack.Thanks again, Bob
View ArticleForum Post: RE: AM3352 RMII ethernet: no data sent or received
Hi Ben,I remember from a different thread on MDIO that you were posting to that mentioned you had your own linux distro that is different from the distro provided with the SDK for the AM335x. From what...
View Article