Forum Post: RE: bitbake shows errors when following Sitara Linux Training:...
Hi Hartmut,Please share the error logfile.Best regards,Miroslav
View ArticleForum Post: RE: AM335x EVM using the second Ethernet port
Thank you! I could not find that kernel option in the release we're using, so I had a look in the TI SDK release of PSP and found it there. I'll have a look into how to port it to allow this option on...
View ArticleForum Post: RE: A/D conversion interfering with touch display?
Try applying the below patch to the kernel and rebuilding the kernel and modules and installing them onto the filesystem.(Please visit the site to view this file)If your unsure how to perform any of...
View ArticleForum Post: Installing gst-plugins into Sitara SDK v7.0
I am trying to build and install gst-plugins-bad unto Sitara SDK v7.0.The SDK had gstreamer-0.10 and gst-plugin-bad old versions preinstall into it.Since I wanted to install on of the latest...
View ArticleForum Post: RE: How to improve the performance of the GPMC interface in burst...
40 CPU clock is the GPMC clocks, if the GPMC clock is 50MHz, then the interval is about 800ns include the burst time about 240ns. So the interval is long.What is the fastest speed of GPMC with DMA? If...
View ArticleForum Post: RE: AM335x resistive touch screen driver rework
I tried this from an Android environment as well. First I downloaded the AM335x JB 4.1.2 binaries. That seemed to work reasonably well on my EVM (though with room for improvement!). Then I rebuilt...
View ArticleForum Post: RE: kernel crash due to USB issue
Hi Bin Liu,Here is the crash log:root@(none):~# echo AT^SMSO > /dev/ttyUSB2root@(none):~# [ 65.125620] option1 ttyUSB4: option_instat_callback: error -71[ 65.131866] option1 ttyUSB3:...
View ArticleForum Post: Wake Up source
Hi,We have custom board based on AM3356 and PMIC being used is TPS65217C. I am trying to get the wakeup source details from M3 after waking up from "RTC Only" sleep mode by calling 'wkup_m3_wake_src'...
View ArticleForum Post: AM335X
Hi,I wanted to know why are the resistors R46, 0.05ohm1% in series with VDDS_MPU and R508, 0.24ohm1% Sense in series with VDDS_DDR supply going to AM335x required. Were they used for any debug? Also,...
View ArticleForum Post: RE: [AM335x] EDMA (TC) priority to EMIF
[quote user="Naoki Kawada"]I don't know what masters are belonging to exp (Expansion Initiator)[/quote]Many recent SoC have references to an Expansion Port, with basically no info other than that it's...
View ArticleForum Post: RE: AM437x GP EVM
Does this hardware platform support NUMA-aware applications?ThanksBest Regards,Maneesh
View ArticleForum Post: RE: AM335X
They are used for measurement of current consumption.They are not needed in production devices.
View ArticleForum Post: RE: bitbake shows errors when following Sitara Linux Training:...
Hi Miroslav;please find attached the error log file.Thanks!Best regardsHartmut(Please visit the site to view this file)
View ArticleForum Post: RE: [AM335x] EDMA (TC) priority to EMIF
[quote user="Mukul Bhatnagar"]Incase of AM335x this port is not tied to anything in design, so it is not a matter of broad vs big customer etc.[/quote]Thank you for clarifying!
View ArticleForum Post: RE: Access PRU in AM437X
Hi,Does anybody using PRU on AM437X?Regards,Yuvaraj
View ArticleForum Post: RE: am335x sgx module on linux v.3.12.y
Hi EricThe official release by TI is 3.12.10. You have posted an identical question that's been moved to the Android forum: http://e2e.ti.com/support/embedded/android/f/509/t/365718.aspx
View ArticleForum Post: RE: Wake Up source
Hi Srinivas,In RTC-only mode only the AM335X RTC remains powered on and functional. Wakeup from RTC-only mode does not differ from cold boot. See section 8.1.4.3.5 in the AM335X TRM Rev. K.
View ArticleClik here to view.
Forum Post: RE: How to use Hardware RNG on non-OS AM335x ?
[quote user="Matthijs van Duin"]When I have a bit more time I will post some further explanation on the various config parameters, and how to operate the quality-monitoring/alarm mechanism of the...
View ArticleForum Post: RE: The HD/VD work in master mode of on AM437x
Feedback from the factory team is that HD/VD master mode is supported. I have pointed out to them the discrepancies in the TRM from your first post and expect additional feedback. I will update this...
View ArticleForum Post: RE: Is there a way to use 24 bit video on BeagleBone Black...
Hi,We only support the official TI distributions that come with the TI SDKs. Please direct your question to the BeagleBone community.Best regards,Miroslav
View Article