Forum Post: RE: AM335x MDIO continous activity
Hi Stefan,Thank you for your reply.I will suggest to our customer that they control the MDIO pins as GPIO by software if the MDIO is disabled via the ENABLE bit in MDIOCONTROL. Hi Matthijs,Thank you...
View ArticleForum Post: AM3356 USB0 OTG port issue
Hi,We have an custom board based on AM3356. In this OTG port is not working as it expected to be. if i configure the port as an permanent host then it works. If I configure the port as an OTG port in...
View ArticleForum Post: RE: LDI32 PRU instruction
That was me :)Thank you for the clarification. (Initially you specified just "assembly").Tried to delete my add but "permission denied" :(
View ArticleForum Post: RE: AM3356 USB0 OTG port issue
Thanks DK,I changed the hardware board(Because you mentioned that it may damage and using new board) and did connected ID pin direct;y from USB mini A connector to AM335x pin now. We will use Mini A to...
View ArticleForum Post: RE: make TV5150 work with AM3517
Hi,I went through the registers. Normally, I was starting tvp5150 without embedded syncs. Because, I thought, as I connected the sync pins separately, I did not need embedded syncs.But, am3517 needs...
View ArticleForum Post: RE: SLC Nand files are nullified if powered down after writing
Yakir,I have doubt that it is the MTD issue with incomplete writes that you have.If a write is interrupted for a power down, only 512 oder 2048 Bytes of data will be invalid, nothing more. And the...
View ArticleForum Post: RE: How to porting U-Boot2013(SDK6.0) to a new board?
Hi Miroslav,I modified that and finally it works well.Many thanks for your great help! Best regards,Michael
View ArticleForum Post: AM3352 DDR Config
Hi,I am new to DDR. I have a doubt.1)Suppose if one configure a register like#define DDR2_EMIF_TIM1 0x0666B3D6#define DDR2_EMIF_TIM2 0x143731DA#define DDR2_EMIF_TIM3 0x00000347#define DDR2_EMIF_SDCFG...
View ArticleForum Post: RE: AM335x deep sleep 0 power consumption
[quote user="Srinivas Marakala1"]Are there any known deep sleep 0 issues with Linux releases for AM335x? I am presently using AM335xSDK 07_00_00_00.[/quote]Hi,You can check the release notes:...
View ArticleForum Post: RE: Confused about developing for AM335x
I fully understand you. Most of these tutorials are useless for some serious work. It took me few months to create a filesystem for a custom board. Probably the most helpful resource I have found so...
View ArticleForum Post: RE: Error on first compile, cannot locate arm-linux-gnueabihf-gcc
Try this way:export PATH=/opt/ti-sdk-am335x-evm-07.00.00.00/linux-devkit/sysroots/i686-arago-linux/usr/bin:$PATHmake ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mrproper
View ArticleForum Post: RE: AM335X NOR flash - 256MB issue
I'm sorry, but I can't help further. Our hardware engineer is on vacation.Best regards,Miroslav
View ArticleForum Post: RE: GPMC Reg value for 256MB NOR flash
Sankar, as I already noted in your other thread, our hardware engineer is on vacation. I'll try to contact the Level 2 support engineers, but they may also be out of office, so answers should be...
View ArticleForum Post: RE: AM3703/DM3730 NAND compatibility question
Hi Rick,Since our hardware engineer is out of office I'll forward your question to the factory team.Best regards,Miroslav
View ArticleForum Post: RE: Does AM437x support SDXC cards on both MMC I/Fs?
Misoslav-san,Thank you so much.I am waiting return from factory team.Best regards, RY
View ArticleForum Post: RE: am335x starter kit. status check.
Hi Kenneth,I just tried using the default SDK v7 binaries with StarterKit rev 1.1A and I can verify that it's working absolutely normal:root@am335x-evm:~# echo mem > /sys/power/state [ 60.227513]...
View ArticleForum Post: am335x: NAND reboot problem with SYSBOOT[0..4] 00100
How this boot combination UART0->XIP->MMC0->NAND is supposed to work? I have system with an 8-bit NAND flash connected to GPMC_AD0..GPMC_AD7. As long as you don't write anything to the flash,...
View ArticleForum Post: RE: AM335x MII interface with Lan8710i issue
Hi Jason,I'm facing the same issue like you did, I'm also using the LAN8710 PHY. the PHY chip gone after PoE plug and unplug several times.Have you solve the problem?RegardsKeldy
View ArticleForum Post: RE: am335x: NAND reboot problem with SYSBOOT[0..4] 00100
Merging this with the old thread. Please post similar questions to one thread.Best regards,Miroslav
View Article