Forum Post: DDR3 Memory Support
What is the largest DDR3 memory size supported/recommended for use with AM335x? The AM335x starter kit uses 2Gb (128x16). Micron is telling me that the recommended memory size for use with AM335x is...
View ArticleForum Post: RE: let me ask how to use "generic_buffer" exactly in order for...
i think you misunderstood whati i asked.actually, i found the index of buffer,have you acted generic_buffer program??i let 2 channels(4, 5) enabled when i acted "./generic_buffer -n tiadc - l 120 -c 1,...
View ArticleClik here to view.
Forum Post: RE: Messages can not be aligned
Hello NormanThanks for your help :)I do not know why non-aligned when call system(udhcpc -xxxx - xxx )I use TI SDK 6.0, kernel 3.2and i recompiled busybox 1.22.2 to overwrite busybox files in...
View ArticleForum Post: RE: Sitara AM3359 ICE V2 works with Profinet
Sebastian,Please visit www.molex.com, For more detailed information, you could start at profinet@molex.comRegards,Vinesh
View ArticleClik here to view.
Forum Post: RE: AM3356 USB1 UART3 enable.
Hi Biser,USB1 has no mux mode to do this is pinmux.But in the note it written as "(13) The internal USB PHY can be configured to multiplex the UART3_TX or UART3_RX signals to this terminal. For more...
View ArticleForum Post: RE: gcc cross-compile for am335x failes
Are the execute permissions set on the helloworld file?
View ArticleForum Post: RE: How to configure resolv.conf on AM335x EVMSK
I'm pretty certain our DHCP server is supplying DNS server information to our network - we have many other computers that work fine. I'll forward this information on to our IT department.The...
View ArticleForum Post: RE: USB powered Beaglebone Black
Hi MiroslavIt happens very often...I tried create-sdcard.sh script to create SD card with my custom images.While i connect a charger with BBB, it starts booting and user LEDs were blinking.I thing it...
View ArticleForum Post: RE: BeagleBone Black - u-boot not booting
Hi Anil I'm also facing the same issue. Once my BBB board works fine with my AC charger(5V, 2A). When i connect with UART-USB Debug cable (TTL-232R-3V3) with my BBB means it doesn't boots up properly...
View ArticleForum Post: RE: Unable to disable AM335x USB PHY
Yes I've tried changing both bits 0 and 1 to no effect.I was following the recommendation on page 2204 of the TRM for disabling unused USB PHY and it only specifies setting bit 0. I'm still puzzled...
View ArticleForum Post: What happened to SmartReflex
I'm Working with SDK 7.0 from the Arago project and the AM3358 on a BeagleBone Black and I'm trying to verify if SmartReflex is enabled. I attempted to follow the instructions...
View ArticleForum Post: RE: Messages can not be aligned
I only get misaligned output if I intentionally alter the line ending translation of the terminal:stty ocrnl -onlcrPerhaps the system() function is doing something to the terminal. Try printing out the...
View ArticleForum Post: RE: NFS root file system SDK 07 (DHCP/BOOTP: Reply not for us)
Santhosh, While I haven't seen the same message that you are seeing i.e. "Reply not for us" there is definately a bug in the SDK 7.0 kernel (kernel 3.12.10) with and the cpsw that affects DHCP and it...
View ArticleForum Post: RE: AM335X EVM Schematic
Hi Damon,I tried downloading this morning again and file marked rev A16_2 was not recognized by Altium. I forwarded to Altium and they also could not open. They felt that the file was not actually...
View ArticleForum Post: RE: mcasp0 problem using Pin Mux configuration 12 with debian 3.15
Hi Roy,I'm glad to hear it was helpful to you. In the future, I do plan on extending the tutorial to show how to add things like volume control to the driver. When I get around to it, I'll update...
View ArticleForum Post: RE: OpenGL support and the AM335x EVM Display Driver
Hi Mike,I'm glad the info is helpful.[quote user="Mike Worster"] 1) So how can I confirm everything I need is working?[/quote]There a couple simple things you can do:1) run "fbset" on the command...
View ArticleForum Post: RE: Problem booting on SD card with AM3874
Hi Sebastien,I believe this indicates an error in data transfer at the physical layer. One thing you can do is enable mmc debugging via linux kernel configuration (found under drivers->mmc support)....
View Article