Hi Rahul, thanks for your fast reply! I will try to boot using your files and I will come back with the results. In the meantime, I attach the .out, .map, .bin and _ti.bin files I use to boot my program. Memory config looks as follow: Memory Configuration Name Origin Length Attributes SRAM 0x402f0400 0x0000fc00 L3OCMC0 0x40300000 0x00010000 M3SHUMEM 0x44d00000 0x00004000 M3SHDMEM 0x44d80000 0x00002000 DDR0 0x80000000 0x40000000 SRAM_LO 0x402f0000 0x00000400 xrw SRAM_HI 0x402f0400 0x0000fc00 xrw OCMC_SRAM 0x40300000 0x00010000 xrw DDR3 0x80000000 0x20000000 *default* 0x00000000 0xffffffff My SRAM is defined quite as you mention but not my OCMC_SRAM. Whats the diference between those two? I am sure this is a basic issue, but I am a beginer and this file info is not so clear for me. Is there a document which explains .map file organization and sections?? I would like to understand propertly the content of this file. A gel file is only required when you are flashing the images to flash and not when you are booting. Let me create a document for you to follow In the future I would like to flash my programs in spi memory without using ccs, maybe with a SD card or another SPI flash writer program. In this case it would be necessary to include the gel file, correct?? I am looking forward your explaining file! Thanks! (Please visit the site to view this file)
↧