Forum Post: Linux/PROCESSOR-SDK-AM437X: Switching between HDMI and LCD at run...
Part Number: PROCESSOR-SDK-AM437X Tool/software: Linux Hi I am trying to switch between HDMI display and LCD panel display at run time in ti-processor-sdk-linux-am437x-evm-03.03.00.04. As we have two...
View ArticleForum Post: RE: CCS/AM5728: U-boot doesn't start after memory loading
Hello Yordan, Actually, My aim is to debug SPL/Uboot code using CCSv7 on AM5728 evaluation board Rev A3. I'm using CCSv7.0.0.00043 (on Linux Ubuntu 16.04) and latest version of SDK (03.03.00.04). I've...
View ArticleForum Post: RE: CCS/AM3356: Version control of SDK
Hello Holger, Can start from here . If they are planing to make some pinches on the AM335x SDK and doesn't have a remote repository they can use the git send-email command to email the patches to the...
View ArticleForum Post: RE: CCS/TMDSICE3359: Issue running project from SPI flash
Hi Rahul, thanks for your fast reply! I will try to boot using your files and I will come back with the results. In the meantime, I attach the .out, .map, .bin and _ti.bin files I use to boot my...
View ArticleForum Post: RE: Linux/PROCESSOR-SDK-AM437X: Switching between HDMI and LCD at...
The software team have been notified. They will respond here.
View ArticleForum Post: RE: CCS/AM3356: Version control of SDK
is this the same recommendation for the TI-RTOS SDK? Regards, Holger
View ArticleForum Post: RE: Linux/AM5728: SDK build issue
Hello Kemal, I have done several test builds in the past two weeks. Double check host setup & bash. Actually, I was successfully build the Processor SDK Linux 03.03.00.04 on same system. 1. Ubuntu...
View ArticleForum Post: RE: TDA2EXEVM: 8bit BT656 embedded sync data from vout2
Hi RAJ, What is the input that you are providing to the DSS? Are you sure that the lower bits have values in your input? Rgds, Brijesh
View ArticleForum Post: RE: Linux/AM5728: HDMI HDCP support
Hi Mukul, Thanks you for your reply. If there is any updates, please let me know.
View ArticleForum Post: RE: Jacinto 6 platform: latest schematics reference for...
Hello, can you please add which J6RSP rails are kept active (if at all) for suspend to RAM? and if there is any rail, what is the current consumption? Thanks, Stefan
View ArticleForum Post: RE: TDA2EXEVM: 8bit BT656 embedded sync data from vout2
What is the input that you are providing to the DSS? This is my usecase .txt file UseCase: chains_vipSingleCam_vdec_Display Capture -> VPE_dei -> Display_Video I am feed camera out to DSS. Are...
View ArticleForum Post: RE: DRA648: J4(dra649) performance issue
Hi Pavel, we have tried different M/N/M2 parameters but the bit "HIGHJITTER" is always set to high while setting CPU@1GHz. the performance on CPU@900Mhz increase around 30% than CPU@1Ghz, the DDR is...
View ArticleForum Post: RE: Linux/AM3715: MLO and serial boot
Hi Biser, I've repeated the test, but now I don't get u-boot prompt, so I am not sure about previous results now... I am trying to load u-boot from serial. I am not sure about the exact steps to achive...
View ArticleForum Post: RE: AM5726: H.264 encoding questions
Hello, Please check this e2e thread: e2e.ti.com/.../590448 BR Margarita
View ArticleForum Post: RE: Linux/AM3715: MLO and serial boot
I would add that this is the same MLO, u-boot images I load from nand ( no change)
View ArticleForum Post: RE: TDA2EXEVM: 8bit BT656 embedded sync data from vout2
Hi Raj, When you configure DSS for BT656, it will output only 8bit, interface width does not matter. I was asking if lsb bit has some valid values in your input. Can you send some white color and see...
View ArticleForum Post: RE: Linux/AM3715: MLO and serial boot
Hi Tsvetolin Shulev, I would add that this is the same MLO, u-boot images I load from nand ( no change) Thank you! Ran
View ArticleForum Post: RE: AM5726: H.264 encoding questions
Hi, Thanks for your useful information. I have gone through that. According to 572x datasheet, there is no IVA support in am5726 . Regards, Prerak
View ArticleForum Post: RE: TDA2EXEVM: 8bit BT656 embedded sync data from vout2
Hi Brijesh, When you configure DSS for BT656, it will output only 8bit, interface width does not matter. Thank you got it. I was asking if lsb bit has some valid values in your input. Can you send some...
View ArticleForum Post: RE: AM5726: H.264 encoding questions
Hello, Please check page 8 (1) or click on (1). BR Margarita
View Article
