Forum Post: RE: am3354 with 1.35V DDR3
Yes, refer to recommended operating voltage for VDDS_DDR shown in Table 3-12 of the AM335x Data Sheet.Regards,Paul
View ArticleForum Post: RE: ping issue with dual mac mode of am335x
Hi Cheng,In dual EMAC mode the two Ethernet ports must be connected to different subnets. What is your network setup?
View ArticleForum Post: RE: AM335X IBIS MODEL FOR RGMII2
Hi Shareef,I will ask somebody from the factory team to help on this.
View ArticleForum Post: RE: How to make BBB think my board is the cape
If it's a I2C EEPROM, which is likely the case, you can read the contents and program the second EEPROM using a programmer like Aardwark.
View ArticleForum Post: RE: Am335x nand errors MT29F2G08ABBEAHCE
Hi Charles,From your schematics it looks like the NAND is powered from 1.8V. Are the AM335X pins powered from 1.8V too? Check especially the GPMC_WAIT0 pin - it's on a different power domain and many...
View ArticleForum Post: RE: AM3352 RS485 (Custom Driver)
Hi Santhosh,There are several threads regarding RS-485 drivers for the AM335X on this forum. You can search for them using the "Search Community" window on top right of the forum page.
View ArticleForum Post: RE: eMMC connected to MMC1 AM335x
I notice there is no MBR, how can we get one on this MMC?root@am335x-evm:~# fdisk /dev/mmcblk0 Welcome to fdisk (util-linux 2.22.2). Changes will remain in memory only, until you decide to write them....
View ArticleForum Post: RE: problem building Graphics_SDK_4_10_00_01 for am335x
I got it working!The configuration was fine, but I forgot to "export ARCH=arm". The build was successful with the following command:make OMAPES=8.x all
View ArticleForum Post: RE: beaglebone sd card driver belongs to platform driver or linux...
Hi Biser,Thank you for the quick reply. It helped to understand about the initialization. One more question. After the OS is loaded, can we access the SD card?Thank you,Baskar
View ArticleForum Post: RE: ARM-based micro for internet application
Giuseppe:EBV Elektronik - +39 011 262 56 90Silica - +39 011 204437Silverstar - +39 011 741280
View ArticleForum Post: RE: am3352 zce package emu4
EMU4 can physically can be connected to pin U17, but this pin mux combination was not timing closed during design so you should not use this option.Regards,Paul
View ArticleForum Post: RE: Am335x nand errors MT29F2G08ABBEAHCE
Thanks! Yeah, SHV3 is also wired to out VMMC. I have to check the layout, but doesn't look like I can rewire SHV3 easily either according to the schematic.
View ArticleForum Post: RE: using linux gpio functions for AM335x beaglebone
The file "linux/gpio.h" is included by kernel code or drivers. You will probably have to build the kernel. Your code will have to either be part of the kernel code, eg in the board file. Or it can be...
View ArticleForum Post: RE: gis with qt
yes .. I mean that linux on the TI Sitara AM35X, AM37X and AM335X processors.
View ArticleForum Post: RE: How to set cpu freq in the SDK 7.0?
thanks biser.if I want setup cpufreq in kernel, how to do? thanks
View ArticleForum Post: RE: Linux 3.12 on AM335x / Beaglebone
hi TI,i am using BBB hwi am using ti-sdk-am335x-evm-07.00.00.00 sdk for BBBtool : arm-linux-gnueabihf-gcccompiled u-boot and kernelable to boot till u-boot (using uSD card )kernel is build with...
View ArticleForum Post: RE: TFT Screen AM335x Starter Kit Android
Yes, it should work, but you will have to adjust the LCD controller parameters according to the display spec.
View Article