Forum Post: RE: Linux/AM5728: linux-devkit.sh question
SO it's just a compressed/packed data form linux-devkit folder? The suffix is puzzling. What's the format of this file ? gz?bz?or someothers? Can it be deleted?
View ArticleForum Post: RE: AM3352: RTC-only wakeup unstable
The PMIC experts have been notified. They will respond here.
View ArticleForum Post: RE: Linux: Media Clock IN J6 EVM
Hi Stanislav Stilyanov , Thanks for the reply , I want to know the driver used by sound card id : AIC3X tlv320aic3x-hifi-0 in jacinto 6 evm.
View ArticleForum Post: RE: AM3359: EDMA transfer from PRU to DDR3
Thanks. I have notified the RTOS team. They will respond here.
View ArticleForum Post: RE: Linux/TDA2EXEVM: Does TDA2Ex can work on 512MB DDR? if so,...
Hi, You need also to modify Linux kernel's .dts file to reflect memory map changes. Please check for more details chapter "6 Memory map of the application" in VisionSDK_Linux_DevelopmentGuide.pdf and...
View ArticleForum Post: RE: TDA2P-ACD: Max frame rate of encoder
No, TDA2P does not support Jpeg 2000 IVAHD performance for encode decode is based on OPP and part no. So please see the device data sheet. Also, the performance of codec is part of codec...
View ArticleForum Post: RE: Linux/DRA77P: XIP boot from 256MB NOR not working after a...
Hi, CTRL_CORE_PAD_GPMC_A27 register, read with the XDS200, is always 0x00040000, both in working and failing case.
View ArticleForum Post: RE: TDA2EVM5777: Where can I find the driver which allocates DMABUF?
Hi Mason Su, Please check if those links can help: events.static.linuxfound.org/.../ELC17-virtmem-exp_0.pdf git.omapzoom.org/ elinux.org/.../DMA_Buffer_Sharing-_An_Introduction.pdf Regards, Yordan
View ArticleForum Post: RTOS/TDA2EXEVM: Enable CANBUS from SYSBIOS in TDA2xx bios_all...
Part Number: TDA2EXEVM Tool/software: TI-RTOS Hi, I want to work with the cluster application ,where it receives the CANBUS data from CAR. I want to enable and access this from DCAN1 from M4 core (...
View ArticleForum Post: RE: Linux/DRA77P: XIP boot from 256MB NOR not working after a...
Hi, for GPMC XIP boot mode ROM only configures address lines GPMC_A18:A0, so I would suspect beyond ROM primary boot pad config of GPMC_A27 is configured to 1 by code, because of which on a warm reset...
View ArticleForum Post: RTOS: sys/bios configuration
Tool/software: TI-RTOS Hi, Trying to select some Load monitoring options. If I select under the "Threads to monitor" Hardware interrupts , Software Interrupts and Tasks and save. Then the configuration...
View ArticleForum Post: RE: Linux/TDA2P-ACD: Building "tda2px_evm_bios_all" configuration...
Hi Rishabh, This issue has been resolved. We have checked the path and set it correctly in the makefile. Regards Rishabh
View ArticleForum Post: RE: Linux/BEAGLEBK: RTC wakeup from low-power mode
Thanks so much. I am also seeing this issue on the Octavo RED board. > Linux octavo 4.9.45-ti-r57 #1 SMP PREEMPT Fri Aug 25 22:58:38 UTC 2017 armv7l How would you use the ALARM event wakeup here? Is...
View ArticleForum Post: RE: TMDSICE3359: EtherNet/IP issues with Molex EIP tool
Hey Paula, My board is now working and is displayed in the EIPtool software.The devices were in the same subnet but the IP address which we assign in List identity request should not be same as that of...
View ArticleForum Post: RE: RTOS: Load monitoring configuration
Thanks. I have notified the RTOS team. They will respond here.
View ArticleForum Post: RE: Linux/TDA2P-ACD: Building "tda2px_evm_bios_all" configuration...
Hi, Glad that your issue is resolved. The gcc tool chain is by Linaro (see linaro link). Can you mention the change that was needed. Thanks. Regards, Rishabh
View ArticleForum Post: CCS/CODECOMPOSER: AM572x example compilation error
Part Number: CODECOMPOSER Tool/software: Code Composer Studio Hi I am using "ti-processor-sdk-rtos-am57xx-evm-04.02.00.09-Linux-x86-Install". I have installed CCS7.4 also. Then I have imported...
View ArticleForum Post: RTOS/AM5728: McASP transmit problem
Part Number: AM5728 Tool/software: TI-RTOS HI! When I configure the MCASP (DATA port \ 4slot TDM),PollingMethod. I have a problem. After initializing MCASP, A buffer overrun occurs ,no data 1. I...
View ArticleForum Post: RE: Linux/dra726: Problem getting MCP25625 seen on Linux
Shravan, This statement is in the device tree Michel
View ArticleForum Post: RE: RTOS/TDA2EXEVM: Enable CANBUS from SYSBIOS in TDA2xx bios_all...
Hi Bhagyam, The code to enable DCAN is present in \vision_sdk\apps\src\rtos\modules\dcan. Regards, Rishabh
View Article