Forum Post: RE: Disabling TImer5 & 6 in CPSW driver in EZSDK 6.0
Sorry for the delay here. This is actively being worked but we are waiting for feedback from another team.We will update this thread ASAP when we have an answer.
View ArticleForum Post: AM3358 Internal RTC gives 2-3 interrupts a second (when 300 MHz)
Hi !We are observing that we get 2-3 interrupts every second on an AM3358 custom board configured for 1 sec periodic timer interrupt when operated at > 300 MHz.The 1 sec periodic timer interrupt...
View ArticleForum Post: RE: Build Arago with Kernel 3.2?
Hi Ivan,building the kernel is not my problem - I actually did that already. What I want to do is build an Arago image with the specific kernel version (modified 3.2) I need for my hardware to work. I...
View ArticleForum Post: am33xx based board: system slow down(freeze)
Hi All,1. TI full support is required. I'm having tough time, please solve it ASAP.2. Using TI Sitara SDK 7.0Â linux 3.12 for AM33xx3. After running applications for few seconds system completely slows...
View ArticleForum Post: RE: CPU idle and PM firmware on AM3352 / random slowdown
Hi Frank,Started a new thread - http://e2e.ti.com/support/arm/sitara_arm/f/791/t/374960.aspx. Please get someone to look into this. I want this to be solved ASAP.Regards,Gangadhar
View ArticleForum Post: RE: AM335x Production Programming
The UniFlash tool is fully supported under Windows for production programming of Sitara processors. What is not necessarily suppoorted is the creation of the "metafiles" that UniFlash tool will use....
View ArticleForum Post: RE: Soft lockup in __getnstimeofday on AM3352
Hi,We can reproduce the problem using TI's kernel at git://git.ti.com/ti-linux-kernel/ti-linux-kernel.gitThanks,Ben
View ArticleForum Post: RE: MAC ID random after kexec
Not sure what is going on from a SW perspective, but the true HW MAC_ID can be read from the device itself. Check out TRM section 9.3.1.24 for the location(s).
View ArticleForum Post: RE: UART pins as GPIO
Hello Guys,Any thoughts on how I can set the control pads to GPIO and then back to Mode 0 for UART within the linux driver?Thank youRegardSanthosh
View ArticleForum Post: am3352 boot time in sdk6.0
Following is bootlog from our am3352 board in sdk6.0We only use the gpmc,ethernet,usb and gpio peripherals in our am3352 boardIt takes 15sec form PowerON to root logina.We have reducted menuconfig...
View ArticleForum Post: RE: Build Arago with Kernel 3.2?
Hi Herbert,If I understand well you can modify and build kernel without any problem. You want to modify and build the Arago file systems. To do that you can see...
View ArticleForum Post: RE: AM335x GPMC MRAM access issue
Probably one of these devices is pulling the lines. I cannot say without seeing the schematics. If you require a schematic review please contact your nearest TI representative.
View ArticleForum Post: RE: AM335x USB termination
The Schematic checklist clearly states what connections should be made: http://processors.wiki.ti.com/index.php/AM335x_Schematic_Checklist#If_USB0_or_USB1_is_not_used... If your customer has not...
View ArticleForum Post: RE: Soft lockup in __getnstimeofday on AM3352
The latest kernel officially supported by TI is v3.12.10. No such issue has been reported there.
View ArticleForum Post: RE: AM335X TOOLCHAIN QT
Hi Ryan,1. You will need to download the TI Sitara SDK version 06.00.00.00 from the TI site: http://software-dl.ti.com/sitara_linux/esd/AM335xSDK/06_00_00_00/index_FDS.html2. Install SDK with to run:...
View ArticleForum Post: RE: BB Black, Unable to handle kernel NULL pointer dereference at...
Which Linux version are you using?
View ArticleForum Post: RE: AM335X USB babble interrupt when DP and DM are both high in...
I've been looking at this problem on the Beaglebone board as we spotted exactly the same issue under faily low transients ( a fan switching ). It is a weakness in the BB design which we are trying to...
View ArticleForum Post: RE: am335x sd card can not boot
There is no such report.If you require a schematic/layout review you will have to contact your nearest TI representative. We cannot accept review requests through the forum.
View ArticleForum Post: RE: Custom our board based on AM335x starter kit
These are the 4-wire touchscreen signals. Please contact your LCD manufacturer for information how the touchscreen signals come out on the LCD you have chosen.
View Article