Forum Post: RE: AM335x custom board: how to include pinmux.h/mux.h into kernel?
Thank you for the script, it is somewhat helpful but still far from a seamless solution.I would like to add a nicer output eg. using macros like DTS file and naming the pins with all their functions...
View ArticleForum Post: RE: Am335x at 19.2 MHz
What version of u-boot are you using? I should be able to tell you what to modify for 19.2MHz. I did some work on that on an older u-boot.Steve K.
View ArticleForum Post: RE: am335x g_audio gadget cannot be enumerated properly on...
SDK70 disable CPPI DMA in menuconfig:Device Drivers ---> [*] USB support ---> MUSB DMA mode (Disable DMA (always use PIO)) --->
View ArticleForum Post: RE: TFT LCD, 16 RGB bit and 24 Bit RGB connection crosscheck
Okay, But for 16 bit LCD connection shown in the table given is correct or not ?i.e. following LCD RGB signals mapped to AM335X LCD Data signals (shown in the table before this )LCD Data bit B4 BLUE...
View ArticleForum Post: AM335x: .dts file node syntax question
Hello,We’ve developed a board based on the BeagleBone Black. It has an external peripheral bus using GPIO lines, controlled by the GPMC, to access multiple UARTs and latches located on an extension...
View ArticleClik here to view.
Forum Post: AM335X MCASP and ADS1278
I am trying to interface the ADS1278 with the AM3358. The ADS1278 would be configured for frame sync discrete format and high speed mode and running from an external oscillator (I would like to get as...
View ArticleForum Post: Adeneo Embedded offers 3+1-Day In-Depth Windows Embedded CE...
Adeneo Embedded and the Embedded Software Store have partnered to present this hands-on WEC 2013 Training Adeneo Embedded 3+1 day in-depth technical training is intended for embedded device...
View ArticleForum Post: RE: nanddump ECC uncorrectable bitflips
I am starting to look at this post.Steve K.
View ArticleForum Post: RE: USB0 and USB1 u-boot to allow booting from USB flash drive...
I am new to this but I think my question is related to the task you want to do. I want to flash my eMMC(MMC1) with a debian. I want it to use USB1. But the Sysboot option only has USB0 which does not...
View ArticleForum Post: USB0 Enumeration error
Hello,We have a custom board based on the Beaglebone Black, I'm trying to get the board to boot from USB, with nothing programmed on or SD card. I'm expecting to get the AM335 RNDIS to initiate as an...
View ArticleForum Post: RE: IDK_Which Ethernet protocoll to choose
Martin,[quote user="Martin H."]1. Which communication protocoll (that runs on the PRUSS) provided by the IDK can be used to communicate with a normal PC, i.e. via a standard ethernet...
View ArticleForum Post: RE: AM335x LCD touch offset issue
Try to disable this part of the /etc/init.d/matrix-gui-2.0 script, then remove the pointercal calibration files and reboot your system. Check how the touchscreen will behave and report back.[quote]...
View ArticleForum Post: RE: Problem creating Bootable MicroSD Card for BeagleBone and...
I am facing the same issue, any solution on this?Thanks,Jonas
View ArticleForum Post: RE: AM335x SGX driver
thank you for your answering.i have done the patch, but if i configure qt4.5 with -plugin-gfx-powervr option, i will get error...
View ArticleForum Post: Arago am335x-evm tisdk-rootfs-image build fails
I'm trying to set up an Arago build so that I can modify the included files. I'm running on an Kubuntu 12.04 system an I started following the Sitara boot camp instructions for setting up an Arago...
View ArticleForum Post: RE: nanddump ECC uncorrectable bitflips
Hello Steve,Any update?Also, I've included the information I provided to Michael Stevens at TI Applications Support on Aug. 11, 2014.Thanks,BobWe are using Micron part number MT29F4G08ABADAH4 (512 MB...
View ArticleForum Post: RE: AM3517 Yaffs2 Multiple Bit ECC
Thank you Wolfgang.I've reported this to the hardware team. I'm not sure about this since we are using the SOM which TI uses in the EVM board. I'm assuming they would have ensured that.I was able to...
View ArticleForum Post: RE: AM335x Production Programming
Curious which tool/process you ended up using in production process and if it was compatible with eMMC
View Article