Forum Post: RE: AM335X DCAN acceptance filter.
Hi,What software are you using? Please read section 23.3.18.1 in the AM335X Technical Reference Manual Rev. K.
View ArticleForum Post: RE: am335x resume from suspend.
Hi Kenneth,The factory team suggested this wiki page for more details: http://processors.wiki.ti.com/index.php/AM335x_StarterWare_Power_management
View ArticleForum Post: RE: Output The Camera data through HDMI : beaglebone Black.
Hi,For Beaglebone Black + Capes + Angstrom build Linux please turn for support to the community at: http://beagleboard.org/Community/Forums
View ArticleForum Post: RE: Uboot ECC
Hi,How do you build the U-Boot? Which make target do you use?Are there any log messages from the SPL before the system hangs?Best regards,Miroslav
View ArticleForum Post: RE: AM335x clock: Could not find fieldval 0 for clock...
Hi BiserI have checked pmic init at function of am33xx_spl_board()_init, it initialized pmic tps65910Â else {Â Â Â Â Â Â int sil_rev;Â Â Â Â Â Â /*Â Â Â Â Â Â * The GP EVM, IDK and EVM SK use a TPS65910 PMIC....
View ArticleForum Post: RE: environment variables about Qt in SDK 7.0
Thanks for your reply.The SDK I uesd is ti-sdk-am335x-evm-07.00.00.00. And this SDK has supported a arago filesystem tar bag which contains the QT relevant lib.Generally, after customers cross compile...
View ArticleForum Post: RE: RTC running 5x fast and all RTC related registers being...
What happens if it is not?  Customer is not using the RTC or the sleep modes.  Trying to understand the severity since they have many, many units deployed in the field on huge towers. Hardware cannot...
View ArticleForum Post: RE: What happened to SmartReflex
Sorry for the delay, I am checking with apps team what is going on...
View ArticleForum Post: RE: AM335X USB_ctrl0 register setting
If you want to turn off USB even if a USB device is connected, you have to add a driver interface to get the user space access to the phy control API, as I said, you could add it in USB sysfs or...
View ArticleForum Post: RE: Clock Transition Mode
Matthijs van Duin,Thank you very much giving me great knowledge.I am not familiar with the ancestor of AM35xx and AM335x at all,but your post powerfully helps me than reading a TRM.Regards,Takeshi...
View ArticleForum Post: RE: AM335x ISDK OCMC SRAM area
Frank-san,[quote user="Frank Walzer"]just to clarify: we currently do not release data on L3 SRAM usage for the protocol implementations. However that may change in the future.[/quote]Do you have a...
View ArticleForum Post: RE: AM335x: USB Babble Interrupt upon USB remote wakeup
hi TI,thank you very muchi got your inputs. but we have a design (based on BBB) in which, the mode change is required using SW commands, we do not have ID pins connected for usb1 in our final productso...
View ArticleForum Post: RE: AM437x: Simplified Power Sequence
Please contact your TI representative. Materials are currently being prepared to explain this.
View ArticleForum Post: RE: AM4378/9 video output interface to NTSC/PAL encoder?
Hi Raz,The AM437X has an parallel LCD output. An external DAC has to be connected to it. There are also 2x10bit or 1x12-bit camera interfaces, supporting different formats.
View ArticleForum Post: RE: AM355x GPMC_CLK (V12) Pin
The GPMC_CLK is derived from the Core PLL. Note that it is output on the GPMC_CLK pin only during synchronous GPMC transactions. This clock cannot be used as a continuous source clock for external...
View ArticleForum Post: RE: assistance on creating SD card
Hi,This forum supports only the TI distributed Linux EZSDK.
View ArticleForum Post: RE: AM3517 DMA sample code
This code should be included in the system bootloader. As I said above TI does not support WEC. Please turn to the BSP provider for support.
View ArticleForum Post: RE: Please can someone confirm if this is the correct boot loader...
Ray,The U-Boot sources are the best documentation. Please check <u-boot_dir>/include/configs/am335x_evm.h. What you would be interested in is the following definition:#define...
View Article