What should be the boot configuration or option I have to provide from below, if I am planning to use below for booting devices and there sequence :
1.USB
2. uSD (MMC0)
3. FLASH memory from Micron which also used in Begle Bone Black (MMC1)
4. Ethernet
I am also able to give jumper provision if required.
Boot Sequence [15:14] [13:12] [11:10] [9] [8] [7:6] [5] [4:0]
UART0 - XIP - MMC0 - NAND 01 00 00 0 0 00 1 00100
MMC1 - MMC0 - UART0 - USB0 01 00 00 0 0 00 1 11100
USB0 - NAND - SPI0 - MMC0 01 00 00 0 0 00 1 01011
EMAC1 - MMC0 - XIP - NAND 01 00 00 0 0 00 1 00111
Regards,
Vikas