Biser-san, Jeff-san,
Thank you so much for your strong support.
Sorry for my late reply.
The requirement is following:
a) GPMC clock cycle is specified as 50MHz on TRM.
But, actually the clock cycle is 100MHz.(GPMCFCLKDIVIDER=0h)
b) Actually, TIMEPARAGRANULARITY=1h
But, its register field value is not specified on TRM.
c) Instead, if you specifies the XIP Timing Parameters using clock cycles, tCSEXTRADELAY must be "1/4".
Because the one clock cycle is specified 20nsec and actually the delay is 5nsec ("1/4").
My important customer has strong requirement to fix above.
So I need approval to fix it from TRM team.
Can you get the approval from TRM team?
Best regards, RY