Forum Post: UART2 , UART4 on starterware
Hi , I need to use UART2 and UART4 on beaglebone black with starterware. Is beaglebone plafform starterware code support uart2 and 4
View ArticleForum Post: RE: AM335x WAN port communicate with LAN port
We use custom boardkernel: 3.2 psp-6.0filesystem: ti linuxand I ask ICPLUS for their switch chip, he say if we want to use NAT mode, we can followed these step# 1. Define variables # AR8035的port#...
View ArticleForum Post: RE: AM335x MMC I/F noise immunity
Morislav-san,Thank you! I am waiting response from your factory team.Best regards, RY
View ArticleForum Post: RE: Problem about the promiscuous mode support in AM3359...
Well not sure that this is the right forum. But i have come across the same problem and i would like to know i TI is currently doing any work on the driver to be able to resolve the issue with...
View ArticleForum Post: RE: AM3359 cpsw linux
That is great news. A link to the driver source code would be appreciated since i would like to back port this into the ubuntu driver.
View ArticleForum Post: am335x and Cinterion EGS3 GPRS modem
Dear all,on our board we are going to use the Cinterion EGS3 as GPRS modem.It has an UART connection to the am335x. We used a GSM/GPRS usb modem, so I have no experience on UART modemthansk
View ArticleForum Post: RE: am335x custom board display selection
eeprom often comes with the display and is documented within the display datasheet.xrandr linux utility helps to list / change many display parameters.You really use Ubuntu on the am335x custom board?
View ArticleForum Post: RE: AM335x i2c problem
- You added a hardware device. A good idea then is to look at the i2c signals using oscilloscope and tell us what is there.- You updated the kernel code. A good idea then is to look at the i2c related...
View ArticleForum Post: RE: SPI high throughput
Great,thanks a lot: that was the issue.Regards.Alberto
View ArticleForum Post: AM3352 : NAND + 2 Ethernet 10/100
hi,i m looking for a configuration that support a 8bit Nand Flash and dual Fast Ethernet 10/100 for a custom board based on AM3354 family. i m trying to use the pinmux tool but i can't manage the...
View ArticleForum Post: RE: AM335x I2C issue on kernel 3.12
Dear all,Is there any update on this?Thanks and BR,F.
View ArticleForum Post: RE: Processor Hangs in SPL or U-Boot
Great! You made everything to determine the source of trouble, but the last step:If the firmware crashes at writing to periferal registers then most probable is something wrong is about respective...
View ArticleForum Post: RE: AM335x ISDK OCMC SRAM area
Hello RY,Following is the break up of L3 SRAM usage with the default configuration:Total memory is 64 KB. 1. First 48.5 KB is used by the PRU Firmware (0x40300000 to 0x4030C1FF) for storing queues.2....
View ArticleForum Post: how to run QT application program in TI base filesystem ??
i use TI Linux SDK6.01.how to run QT application program in TI base filesystem (arago-base-tisdk-image-am335x-evm) ??2. Is TI's QT free when production??3. if TI's QT is free, need we to do open...
View ArticleForum Post: RE: AM335x RGMII Problem (PHY KSZ9021RL): ping fails
Sorry...I pulled the register name from another device...same function, different name. That doesn't help your search. ;)CPSW_STATS @ TRM section 14.5.4MACCONTROL @ TRM section 14.5.7
View ArticleForum Post: Sitara Linux Application Profiler
Hi Champs!Can you give any recommendations or guidance as to which software profiling tool that the Sitara software folks are using when profiling (looking for memory leaks as a example) Linux based...
View ArticleForum Post: RE: how to run QT application program in TI base filesystem ??
Follow this link: http://processors.wiki.ti.com/index.php/Sitara_Linux_Training:_Hands_on_with_QT
View ArticleForum Post: RE: am335x custom board display selection
In SDK 7.0, you can modify timing parameters for a display in device tree. Look at the Sitara Linux SDK LCD Controller page in the board port section.
View ArticleForum Post: AM335X TFTPBoot, MLO through TFTP (boot partition on TFTP only)?
I have a custom board based on the Beaglebone Black, I'm looking to do a "pure" boot over TFTP, that is, from no on-board boot partition (boot partition would be on the TFTP server), blank flash, and...
View ArticleForum Post: head.S fails to build for DEBUG on AM335x
Good evening,I am debugging a custom PCB that is similar to the BeagleBone Black. I am crashing at the "Starting kernel" message. For the debugging, I built a 3.14 kernel with the following...
View Article
